|
||
| Home > Manufacturers > Norgren, Inc. | ||
 |
|
Norgren Actuators Norgren continues to set a world standard with a comprehensive, innovative offering of pneumatic actuators for the industrial market. Whether it's a conventional rod type cylinder, rodless cylinder or rotary actuator, Norgren products are manufactured solutions. Our EA or EJ Series NFPA interchangeable cylinders with its patented Impact Dampening Piston Seals have proven to solve the most severe applications. For smaller, more compact applications, the Series 90000, Series F or Series RL cylinder lines are used to perform large jobs in a small area. Norgren manufactures a wide variety of standard products, which are used for the most demanding of applications. If modified or special products are required to solve application challenges, Norgren is ready to help. Our experienced application engineering department is ready to help design modified or completely special products to ensure successful application and use.
Attention Internet Explorer users: To view the PDF file click the hyperlink below.
If you wish to save the PDF file to view off-line, you must right-click the
hyperlink and choose the "Save Target As..." option.
|
 |
Series RL Roundline Actuator Bore sizes from 7/16" to 2-1/2" Crimped non repairable design for cost effective application Aluminum Head & Cap Stainless Steel tube and piston rod for corrosion resistance Single acting or dounle acting operation Interchangeable to competitive cylinders |
 |
Series 90000 Compact Actuator Bore sizes from 12mm to 100mm Anodized extruded aluminum body for corrosion resistance Integral slots in body for low profile sensing switches Anodized aluminum head & cap for corrosion resistance Standard magnetic piston 303 Stainless Steel piston rod Long rod bearing for strokes of 2 inches or greater Available in single or double acting operation Externally or internally guided versions for non-rotating operation |
 |
Series A/EA Aluminum NFPA Tie Rod Actuator Bore sizes from 1-1/2" to 8" 22 NFPA and 3 on NFPA mounting styles available Standard A Series with U-cup piston seals Optional EA Series with patented impact dampening seals Ultra cushion* design for smooth load decelration Optional pinned piston to rod bond for superior strength Piston wear band (bearing) is Standard Threaded oil filled sintered iron rod bearing Designed for Non-Lube operation View Series A/EA Aluminum NFPA Tie Rod Actuators (1.69 MB)
|
 |
Series J/EJ Steel NFPA Tie Rod Actuator Bore sizes from 1-1/2" to 12" 22 NFPA and 2 Non-NFPA mounting styles available Standard J series with U-cup piston seals Optional EJ series with patented impact damplening seals Ultra cushion* design for smooth load deceleration Decel-Air* extended cushions for higher load capabilities Optional pinned piston to rod bond for superior strength Piston wear band (bearing) is Standard Threaded oil filled sintered iron rod bearing Designed for Non-Lube operation View Series J/EJ Steel NFPA Tie Rod Actuators (1.69 MB)
|
 |
Series 8000 ISO/VDMA Actuator Bore sizes from 32mm to 320mm Meets ISO 6431 and VDMA 24562 Standards Bolt on mounting accessories for eas of configuration Standard hardchrome plated stainless steel piston rod Single or double acting models Passive or Active brake options Non-Rotating option available |
 |
Lintra-Lite Rodless Actuator Bore sizes from 25mm to 40mm Up to 50% space savings in most applications Proven zipping seal strip for minimal leakage Optional magnetic piston or adjustable cushion Integral slots for magnetic sensing switches |
 |
Series 46000 Lintra Rodless Actuator Bore sizes from 16mm to 80mm Internally, externally & roller guided models High moment carrying capabilities Proven zipping seal strip for minimal leakage Dual porting from one end is Standard Adjustable cushions and magnetic piston is Standard Active or passive brake systems available |
 |
Series SS Stainless Steel NFPA Tie Rod Actuator Bore sizes from 1-1/8" to 8" 10 NFPA mounting styles available 304 Stainless steel head, cap, tube & rod bearing housing 303 Stainless steel piston rod & tie rods Stainless steel acorn tie rod nuts Piston wear band is Standard Designed for non lube operation |
 |
Vane Rotary Actuators Torque's ranging to 3562 inch lbs. Single or double vane configurations Adjustable strokes available Buffer cushioning standard Hydro-cushion option Optional magnetic sensor switches |
 |
Rack & Pinion Rotary Actuators Bore sizes from 1/2" to 2-1/2" Single or double rack designs Torque's to 5500 inch lbs. Pneumatic or hydraulic service Standard 2, 3, 4 or 5 position models Standard integral Air/Oil models Rotations of 1080 degrees |
 |
Series N Non Rotating NFPA Actuator Bore sizes from 1-1/8" to 4" Twin rod design for high load applications Designed for non-lube operation Piston wear strip standard for side load resistance Ultra cushion* design for smooth load deceleration Tooling plate included for load mounting |
 |
Tiny Tim Actuators Bore sizes from 3/4" to 1-1/8" Available in NFPA interchangeable or non interchangeable Heads & caps are brass for corrosion resistance Impact dampening seal option for load energy absorption Single or double acting models View Tiny Tim Series Small Bore Actuator (0.4 MB) |
 |
Pneumatic Grippers Low weight, compact size, smooth, and accurate movement. View Pneumatic Grippers (0.5 MB) |
 |
Interchangeable Compacts Light weight, compact design. Shorter than ISO/VDMA or NFPA equivalent. Low friction characteristics for high speed operation. |
 |
Miniature Roundline Cylinders Ideal for very light load applications. Low friction, no fittings required. Corrosion resistant materials. Low friction, no fittings required. Corrosion resistant materials. View Miniature Roundline Cylinders (36 KB) |
 |
Compact Rotary Actuators High torque, minimal radial or thrust shudder. Adjustable angle. View Interchangeable Compacts (98 KB) |
|
Accessories, and Helpful Engineering Information |